Complete white shaker van kitchen cabinet set with a bamboo countertop, 4 cabinets, 5 doors, 4 drawers, and a pre-cut sink base. Made to order.

Fully assembled upper cabinet with a roof-following angled top, twin bamboo doors with push-button latch locks, and a two-compartment interior — built for campervans and RVs

Shaker-style van upper storage cabinet with two lift-door bays, four compartments, round locks, and full-width LED lighting. Made to order.

Shaker-style van overhead cabinet with an enclosed microwave bay, Door Lifter (Flap Stay) door, round latch, and built-in LED lighting. Made to order.

A convertible left-and-right bench pair that works as dinette seating by day and joins into a full-width platform by night. Shipped disassembled as empty enclosures, ready for your build.

A two-piece modular dinette bench set built for camper van conversions. Both benches lift open on flap-top lids for generous under-seat storage — the left adds a pull-out slide and service provisions, while the right houses your leisure batteries and inverter in a purpose-built bay. Made from ultralight birch-finish plywood and painted in Pastel Sage. Bench cabinets only; cushions, tables and appliances are not included. Ships assembled.BENCH L 1. Title Vankea Modular Dinette Bench Cabinet (Left) — Lightweight Camper Van Seat Box with Lift-Up Storage Alternatives: Vankea Camper Van Dinette Bench — Left Module | Vankea Lightweight Seat-Box Bench (Left-Hand) | Vankea Modular Bench Base Cabinet — Left SEO URL / handle: vankea-modular-dinette-bench-cabinet-left-campervanMeta title: Vankea Left Dinette Bench Cabinet for Camper Vans | Lift-Up Storage Seat BoxMeta description: Lightweight left-hand dinette bench cabinet for camper van conversions. Lift-up flap-top storage, pull-out slide, birch-finish plywood, painted Pastel Sage faces. Bench cabinet only. Ships assembled.Meta keywords: camper van dinette bench, van seat box cabinet, campervan bench storage, lift up bench seat, modular van bench, lightweight plywood bench, van conversion seating, RV dinette base, left hand bench cabinet, under-seat storage van 2. Short Description A lightweight left-hand dinette bench cabinet built for camper van conversions. Its lift-up flap top opens to generous under-seat storage, while a pull-out slide and internal service provisions make it a smart base for your seating and galley area. Painted in Pastel Sage over a birch-finish ultralight plywood body. Bench cabinet only — cushions and tables not included. Material Used (From the task description and the EP-1254 BOM — verified in the Instruction PDF.) Carcass: 15mm ultralightweight plywood with birch finish (magnolia-tree or exclusive Paulownia core — described as saving up to ~37% of conversion weight) Painted faces / finish: heavier MDF used only for faces, finished with primer + paint + putty Color: Dulux 10GY 71/180 (Pastel Sage) Joinery/hardware: cam-lock housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws (3.5×30), telescopic slides, and flap hinges What's Included 1 × plywood dinette bench cabinet (Left), painted Pastel Sage Lift-up folding flap top (2 folding flap panels) with finger-slot handles for under-seat access 1 × pull-out on telescopic slides (2 slide sets built in) 2 × flap hinge sets for the lift-up top Integrated service provisions/cutouts (vents + pass-through openings) designed to house van equipment All assembly hardware: cam housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws Cabinet only. Does NOT include cushions, tables, faucet, fridge, shower box, water tank, evaporator/AC, or any appliance — those items are separate and only accommodated by the cabinet's cutouts. Unique Points (4) Ultralight construction — birch-finish plywood with a Paulownia/magnolia core that Vankea describes as cutting up to ~37% of typical conversion cabinet weight, easing your van's payload. Lift-up flap-top storage — the split folding top opens on flap hinges for easy, hands-free access to a large under-seat storage bay. Built-in pull-out slide — integrated telescopic slides give you a smooth pull-out section for extra accessible storage within the bench. Service-ready by design — factory vents and cutouts let the bench cleanly house van systems (e.g. water tank, shower box, or cooling unit) so wiring and plumbing stay tidy and hidden. Long Description The Vankea Modular Dinette Bench Cabinet (Left) is a lightweight seat-box base designed for camper van and van-life conversions. Rather than a heavy fixed bench, it's built from ultralightweight birch-finish plywood with a Paulownia/magnolia-tree core — a construction Vankea uses to trim as much as 37% off the weight of a conversion, which matters when every kilo counts toward your payload. The split top lifts up on flap hinges, opening to a spacious under-seat storage bay, and finger-slot handles keep the lines clean with no protruding hardware. A built-in pull-out section on telescopic slides adds a second, easy-reach storage zone. The left module is also engineered with integrated vents and cutouts so it can neatly house van services — the design accommodates equipment such as a fresh-water tank, shower box, or cooling unit — keeping plumbing and wiring hidden inside the bench. Faces are finished in a hand-painted Pastel Sage (Dulux 10GY 71/180) over primer and putty for a smooth, premium cabinetry look, while the carcass is joined with a cam-and-dowel system for a rigid structure that stands up to life on the road. Sold as a standalone bench cabinet, it works as part of a dinette layout in a camper van of almost any size. Technical Specification Table Specification Detail Product type Modular dinette bench base cabinet (Left) Overall dimensions (W × D × H) 1468 × 640 × 455 mm (as provided) Carcass material 15mm ultralightweight plywood, birch finish (Paulownia/magnolia core) Face material MDF, painted Finish / color Dulux 10GY 71/180 (Pastel Sage) Top Lift-up folding flap top (2 flaps) on flap hinges Pull-out Telescopic slides (2 sets) Service provisions Vents + cutouts to house water tank / shower box / cooling unit (appliances not included) Joinery Cam housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws (3.5×30) Finishing Primer, paint, putty Assembly Ships assembled Not included Cushions, tables, and all appliances/equipment BENCH R 1. Title Vankea Modular Dinette Bench Cabinet (Right) — Lightweight Camper Van Seat Box with Battery/Inverter Bay Alternatives: Vankea Camper Van Dinette Bench — Right Module | Vankea Lightweight Seat-Box Bench (Right-Hand) | Vankea Modular Bench Base Cabinet — Right SEO URL / handle: vankea-modular-dinette-bench-cabinet-right-campervanMeta title: Vankea Right Dinette Bench Cabinet for Camper Vans | Battery Box Seat StorageMeta description: Lightweight right-hand dinette bench cabinet for camper van conversions. Lift-up flap-top storage plus a built-in battery & inverter box bay. Birch-finish plywood, painted Pastel Sage. Bench cabinet only. Ships assembled.Meta keywords: camper van dinette bench, van battery box bench, campervan seat storage, lift up bench seat, modular van bench, inverter box cabinet, lightweight plywood bench, van electrical storage, right hand bench cabinet, under-seat storage van 2. Short Description A lightweight right-hand dinette bench cabinet for camper van conversions, with a lift-up flap top for under-seat storage and a purpose-built internal bay to house your leisure batteries and inverter. Painted in Pastel Sage over a birch-finish ultralight plywood body. Bench cabinet only — cushions and tables not included. Material Used (From the task description and the EP-1257 BOM — verified in the Instruction PDF.) Carcass: 15mm ultralightweight plywood with birch finish (magnolia-tree or exclusive Paulownia core — described as saving up to ~37% of conversion weight) Painted faces / finish: heavier MDF used only for faces, finished with primer + paint + putty Color: Dulux 10GY 71/180 (Pastel Sage) Joinery/hardware: cam-lock housings, M6 PVC inserts + M6 screws, wooden dowels (8×40), wood screws (3.5×30), and flap hinges What's Included 1 × plywood dinette bench cabinet (Right), painted Pastel Sage Lift-up folding flap top (2 flap panels) with finger-slot handles for under-seat access 2 × flap hinge sets for the lift-up top Built-in battery & inverter box compartment (dedicated top/back/support panels + internal separator) Ventilation cutouts designed for safe airflow around electrical equipment All assembly hardware: cam housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws Cabinet only. Does NOT include cushions, tables, batteries, inverter, or any appliance — the battery/inverter bay is a housing designed to fit those items, which are sold separately. Unique Points (4) Built-in battery & inverter bay — a dedicated internal box (with its own top, back, support panels and separator) is engineered to house leisure batteries and an inverter, so your power system tucks neatly under the seat. Ultralight construction — birch-finish plywood with a Paulownia/magnolia core that Vankea describes as cutting up to ~37% of typical cabinet weight, protecting your payload. Lift-up flap-top storage — the split folding top opens on flap hinges for easy, hands-free access to under-seat storage alongside the electrical bay. Ventilated by design — factory-cut vents promote airflow around the electrical gear, helping keep batteries and the inverter cool. Long Description The Vankea Modular Dinette Bench Cabinet (Right) pairs comfortable seating with a smart home for your van's electrical system. Built from ultralightweight birch-finish plywood with a Paulownia/magnolia-tree core, it keeps weight low — a construction Vankea uses to shave up to 37% off a conversion's cabinet weight — while staying rigid enough for daily life on the road. What sets the right module apart is its purpose-built battery and inverter bay: a dedicated internal box, complete with its own top, back, support panels and separator, engineered to house leisure batteries and an inverter safely out of sight. Ventilation cutouts help air move around the electrical gear to keep it cool. Above the bay, the split top lifts on flap hinges to reveal further under-seat storage, with finger-slot handles for a clean, snag-free finish. The faces are hand-painted in Pastel Sage (Dulux 10GY 71/180) over primer and putty for a smooth premium look, and the carcass is joined with a cam-and-dowel system for lasting strength. Sold as a standalone bench cabinet, it completes a dinette layout and centralizes your power storage in a camper van of almost any size. Technical Specification Table Specification Detail Product type Modular dinette bench base cabinet (Right) Overall dimensions (W × D × H) 1467 × 640 × 440 mm (as provided) Carcass material 15mm ultralightweight plywood, birch finish (Paulownia/magnolia core) Face material MDF, painted Finish / color Dulux 10GY 71/180 (Pastel Sage) Top Lift-up folding flap top (2 flaps) on flap hinges Internal bay Built-in battery & inverter box (top/back/support panels + separator) Ventilation Factory-cut vents for electrical airflow Joinery Cam housings, M6 PVC inserts + M6 screws, wooden dowels (8×40), wood screws (3.5×30) Finishing Primer, paint, putty Assembly Ships assembled Not included Cushions, tables, batteries, inverter, and all appliances/equipment Optional: sell as a matched set If you list them together, a set title could be "Vankea Modular Dinette Bench Set (Left + Right) — Lightweight Camper Van Seat Boxes with Storage, Battery Bay & Pull-Out." The two form an L-shaped/facing dinette: the Left holds a pull-out and service provisions, the Right centralizes your power system — both with lift-up storage tops. Proof / source map (everything is in ClickUp) Material story (ultralight birch/Paulownia plywood, ~37% weight saving, MDF painted faces) → task description text on both IM-3150 (Bench L) and IM-3149 (Bench R). Bench L hardware & construction → EP-1254 Bench L Instruction.pdf BOM: 15mm plywood (2440×1220×15), telescopic slides ×2, flap hinges ×2, cam housings, PVC inserts, dowels, screws, paint/primer/putty; parts list items 22–23 = folding flaps. Bench L provisions (not sold) → same PDF parts list items 14 Shower Panel, 19 Evaporator, 20 Shower Box, 21 Water Tank 30G. Bench R hardware & construction → EP-1257 Bench R Instruction.pdf BOM: Ply 1220×2440×15, flap hinges ×2, cam housings, PVC inserts, dowels (8×40), screws, paint/primer/putty; parts list item 21 = Flap ×2. Bench R battery/inverter bay (housing sold; batteries/inverter not sold) → same PDF parts list items 16–19, 23 (Battery Box panels/support), 24 = 2× 600A Battery, 25 = 3000W Inverter. Color (Pastel Sage) & dimensions → as you provided; category "Benches" confirmed in the Bench L custom field. Design features (lift-up flap top, vents, cutouts, stepped seat profile) → design/description images in both tasks and your two renders.combined 1. Title (Product Name) Primary recommendation: Vankea Modular Dinette Bench Set (Left + Right) — Lightweight Camper Van Seat Boxes with Lift-Up Storage, Battery Bay & Pull-Out Shorter alternatives: Vankea Camper Van Dinette Bench Set — 2-Piece Lightweight Seat Boxes Vankea Modular Dinette Bench Cabinets (Pair) — Storage, Battery & Pull-Out Vankea Van Dinette Bench Set — Left & Right Seat-Box Cabinets SEO URL / handle: vankea-modular-dinette-bench-set-campervan Meta title: Vankea Dinette Bench Set for Camper Vans | Left & Right Seat Boxes with Storage & Battery Bay Meta description: Two-piece modular dinette bench set for camper van conversions. Lift-up flap-top storage, a pull-out slide, and a built-in battery/inverter bay in lightweight birch-finish plywood, painted Pastel Sage. Bench cabinets only — ships assembled. Meta keywords: camper van dinette bench set, van seat box cabinets, campervan bench storage, lift up bench seat, modular van bench, van battery box bench, inverter box cabinet, lightweight plywood bench, van conversion seating, under-seat storage van, RV dinette base, 2 piece bench set 2. Short Description (Subtitle) A two-piece modular dinette bench set built for camper van conversions. Both benches lift open on flap-top lids for generous under-seat storage — the left adds a pull-out slide and service provisions, while the right houses your leisure batteries and inverter in a purpose-built bay. Made from ultralight birch-finish plywood and painted in Pastel Sage. Bench cabinets only; cushions, tables and appliances are not included. Ships assembled. Material Used (From both task descriptions and the EP-1254 & EP-1257 BOM tables — verified in the Instruction PDFs.) Carcass: 15mm ultralightweight plywood with a birch finish and a magnolia-tree or exclusive Paulownia core — a construction Vankea describes as saving up to ~37% of a conversion's cabinet weight Painted faces: heavier MDF used only for the visible faces, finished with primer, paint and putty for a smooth premium look Color: Dulux 10GY 71/180 (Pastel Sage) Joinery & hardware: cam-lock housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws (3.5×30), flap hinges, and telescopic slides (left bench) What's Included In the set (2 bench cabinets): 1 × Left dinette bench cabinet, painted Pastel Sage — lift-up folding flap top, a built-in pull-out on telescopic slides, and integrated service provisions (vents/cutouts) 1 × Right dinette bench cabinet, painted Pastel Sage — lift-up folding flap top and a built-in battery/inverter box bay Lift-up folding flap tops with finger-slot handles on both benches (2 flap panels each) Flap hinge sets (2 per bench) and telescopic slides (2 sets, left bench) Built-in battery & inverter box compartment on the right bench (dedicated top/back/support panels + internal separator) All assembly hardware: cam housings, M6 PVC inserts + M6 screws, wooden dowels, wood screws Not included: cushions, tables, faucet, fridge, batteries, inverter, water tank, shower box, evaporator/cooling unit, or any other appliance. The battery bay and service cutouts are designed to house such equipment, which is sold separately. Unique Points (4) Complete two-piece dinette base — the Left and Right benches are engineered as a matched set to form your van's seating/dinette layout, arriving as ready-to-mount seat boxes. Lift-up flap-top storage on both benches — split folding tops open on flap hinges with finger-slot handles, turning the full footprint under each seat into easy-access storage. Built-in power bay + pull-out — the right bench has a dedicated, ventilated compartment to house leisure batteries and an inverter, while the left bench adds a smooth telescopic pull-out and factory cutouts for services like a water tank or shower unit. Ultralight, premium build — birch-finish plywood with a Paulownia/magnolia core keeps weight down (Vankea cites up to ~37% saving), while painted MDF faces in Pastel Sage give a clean, high-end cabinetry finish. Long Description The Vankea Modular Dinette Bench Set gives your camper van conversion a complete, ready-to-mount seating base in two coordinated pieces. Instead of heavy fixed benches, both cabinets are built from ultralightweight birch-finish plywood with a Paulownia/magnolia-tree core — a construction Vankea uses to trim as much as 37% off the weight of a conversion, which matters when every kilo counts toward your payload. Each bench opens from the top: split flap-top lids lift on hinges to reveal spacious under-seat storage, and finger-slot handles keep the lines clean with no protruding hardware. The two modules are designed to do more than store gear, though. The left bench includes a built-in pull-out on telescopic slides for easy-reach items, plus integrated vents and cutouts so it can neatly house van services such as a fresh-water tank, shower box or cooling unit — keeping plumbing and wiring hidden inside the seat. The right bench centralizes your electrical system in a purpose-built battery and inverter bay, complete with its own top, back, support panels and separator, with ventilation cutouts to help keep the gear cool. Faces are hand-painted in Pastel Sage (Dulux 10GY 71/180) over primer and putty for a smooth, premium cabinetry look, while the carcasses are joined with a cam-and-dowel system for a rigid structure that stands up to life on the road. Sold as a standalone bench set — cushions, tables and appliances not included — it drops into a dinette layout in a camper van of almost any size. 6. Technical Specification Table Specification Detail Product type Modular dinette bench set — 2 base cabinets (Left + Right) Overall dimensions — Left bench (W × D × H) 1468 × 640 × 455 mm (as provided) Overall dimensions — Right bench (W × D × H) 1467 × 640 × 440 mm (as provided) Carcass material 15mm ultralightweight plywood, birch finish (Paulownia/magnolia core) Face material MDF, painted Finish / color Dulux 10GY 71/180 (Pastel Sage) Tops Lift-up folding flap tops (2 flaps per bench) on flap hinges Left bench features Telescopic pull-out (2 slide sets) + service provisions/cutouts (water tank / shower box / cooling unit) Right bench features Built-in battery & inverter box bay (top/back/support panels + separator) + ventilation cutouts Joinery Cam housings, M6 PVC inserts + M6 screws, wooden dowels (8×40 on right bench), wood screws (3.5×30) Finishing Primer, paint, putty Assembly Ships assembled Not included Cushions, tables, batteries, inverter, water tank, shower box, cooling unit, and all other appliances Proof / source map (all provable in ClickUp) Set = Left (EP-1254 / IM-3150) + Right (EP-1257 / IM-3149), category "Benches," June 2026 shipment (Pallet 2) — confirmed on both task pages. Material story (ultralight birch/Paulownia plywood, ~37% weight saving, painted MDF faces) — task description text on both tasks. Left bench build — EP-1254 Instruction PDF BOM: 15mm plywood (2440×1220×15), telescopic slides ×2, flap hinges ×2, cam housings, PVC inserts, dowels, screws, paint/primer/putty; folding flaps (items 22–23). Service provisions (items 14, 19, 20, 21 = shower panel, evaporator, shower box, 30G water tank) are cutouts only — excluded from what's sold. Right bench build — EP-1257 Instruction PDF BOM: Ply 1220×2440×15, flap hinges ×2, cam housings, PVC inserts, dowels (8×40), screws, paint/primer/putty; flap ×2 (item 21); battery/inverter box panels (items 16–19, 23). Batteries (item 24, 2× 600A) and inverter (item 25, 3000W) are housed items only — excluded from what's sold. Color & dimensions — as you provided (Pastel Sage; Left 1468×640×455, Right 1467×640×440). No — I did not add a bed feature, and after re-checking ClickUp I'd recommend we don't claim it unless you confirm it yourself. Here's the honest picture. What I checked for a bed function: both product tasks and their descriptions, the source/engineering task (EP-1254), its related tasks (EP-5315 and the listing task), the parts lists and BOM tables, and the design/description images. Nothing in ClickUp explicitly says these benches convert into a bed. The only place I haven't opened is the three product videos — but those would need downloading to view properly (which I won't do without your OK), and a video alone isn't the solid, written proof you asked me to rely on. Do I understand dinette beds? Yes. In a camper van, a dinette is a facing-bench + table seating group, and a classic "dinette bed" converts by dropping the table down to bench-seat height so it bridges the gap between the two benches, then laying the seat cushions across to form a flat sleeping platform. Some designs instead use a slide-out/pull-out section from one bench, or a separate infill board, to fill the middle. Why I'm cautious about claiming it for these benches specifically: The conversion normally relies on the table dropping and the cushions filling the gap — and you've told me this product includes no table and no cushions. So even if the two benches are the right heights to act as a bed base, the customer couldn't actually sleep on it without their own table and cushions. Advertising "converts to a bed" when neither the table nor cushions are included could be misleading. That said, there is a supporting hint: the left bench has a built-in telescopic pull-out, which in many van dinettes is exactly the mechanism used to extend a bench into a bed base. But the ClickUp files don't state that's its purpose, so I can't verify it — the slide could equally just be a storage drawer. So, three ways I can handle it — your call: Leave it out (what I've done) — safest, everything stays provable. Add a careful, accurate line that doesn't overclaim, e.g.: "The two facing benches are designed to work as a dinette layout and can form the base of a bed platform when paired with a suitable infill/table and cushions (sold separately)." This is honest and still markets the benefit. Add a full "converts to a bed" feature — but only if you can confirm it from the van design or one of the videos, ideally with the flat sleeping dimensions (the gap between the two benches when placed apart).

Fully assembled van galley kitchen base cabinet with a pre-cut sink opening, fold-out countertop extension, and front + rear access storage. Bamboo top, pastel-sage body. Built for vans and RVs.

A ready-to-install compact galley kitchen cabinet for camper van and van-life builds. It pairs an ultralight plywood body in Stormy Sea blue with shaker painted MDF doors, a solid bamboo worktop, a fold-out side table, and soft-close drawer plus pull-out storage. Arrives painted and assembled — cabinet only, ready to drop into any van layout. Here are the exact edits to make on the product page. Each one is "find this → replace with this." I've written them to match the storage/table setup shown in your renders (side fold-out table, rear drop-down table, extended countertop board, plus the left-side door and lower cupboard that the current copy misses). One number to confirm before you publish: the drawer count. I've written "[X]" wherever the drawer number appears — check with engineering whether the pull-out unit is a single unit or a stack of 3 drawers (that "1 Drawer / 3 Drawers" line), then drop the real number in. 1. Top summary paragraph (under the title) Find:"a fold-out side table, and soft-close drawer plus pull-out storage." Replace with:"a fold-out side table and a rear drop-down table, plus soft-close drawer, a lower cupboard, a side door and pull-out storage." 2. Feature card — "Real bamboo top with a fold-out table" Find the heading:"Real bamboo top with a fold-out table" Replace with:"Real bamboo top with fold-out and drop-down tables" Find the card text:"A durable ~11/16" (18 mm) bamboo worktop plus a drop-down side table that expands prep space when parked and folds flat for travel, backed by soft-close drawer and pull-out storage." Replace with:"A durable ~11/16" (18 mm) bamboo worktop plus a side fold-out table and a rear drop-down table that expand prep space when parked and fold flat for travel, backed by drawer, cupboard and pull-out storage." 3. "The Details" — third paragraph (the storage sentence) Find:"On top sits a genuine ~11/16" (18 mm) solid bamboo worktop with a hinged drop-down side table that extends your prep area when you're parked and folds away flat while driving. A removable countertop cover conceals the pre-cut basin opening when it isn't in use. Inside, storage is handled by a soft-close under-mount drawer, a full side-mount pull-out unit, and an internal shelf, all secured with push-button latches that stay shut on rough roads." Replace with:"On top sits a genuine ~11/16" (18 mm) solid bamboo worktop. It's flanked by a side fold-out table and, at the rear, a drop-down table that folds down into a second work surface — both extend your prep area when parked and fold away flat while driving, alongside an extended countertop section. A removable countertop cover conceals the pre-cut basin opening when it isn't in use. Inside, storage is handled by a soft-close drawer, a lower cupboard, a side door and a full side-mount pull-out unit, plus an internal shelf, all secured with push-button latches that stay shut on rough roads." 4. "What's Included" list Find:"~11/16" (18 mm) bamboo countertop, with an extended section and a removable basin coverFold-out / drop-down side table extensionSoft-close under-mount drawer + side-mount pull-out unit + internal shelf" Replace with:"~11/16" (18 mm) bamboo countertop, with an extended section and a removable basin coverSide fold-out table + rear drop-down tableSoft-close drawer + lower cupboard + side door + side-mount pull-out unit + internal shelf" 5. Specifications table — "SIDE TABLE" row Find:SIDE TABLE — Hinged drop-down / fold-out extension Replace with:TABLES — Side fold-out table + rear drop-down table (folds into a work surface) + extended countertop section 6. Specifications table — "DRAWER & STORAGE" row Find:DRAWER & STORAGE — 1× soft-close under-mount drawer (13.78" slide); 1× side-mount pull-out unit (15.75" & 11.81 in slides); internal shelf Replace with:DRAWER & STORAGE — [X]× soft-close drawer (13.78" slide); 1× lower cupboard; 1× side door; 1× side-mount pull-out unit (15.75" & 11.81 in slides); internal shelf That's everything. The only blank to fill is the "[X]" drawer count in items 6 (and adjust "drawer/drawers" wording in items 1–4 if it turns out to be more than one) — confirm that with engineering and you're done.

Ultralight, made-to-order galley kitchen cabinetry for van conversions — birch-finish plywood with painted shaker doors, engineered to cut weight without cutting quality.

An overhead wall cabinet for camper vans with lift-up Shaker doors held open by door lifters (flap-stays). Two doors open upward to reveal two enclosed bays, split by a central partition with one shelf per bay — all in a slim, angled body that hugs the van roofline. Built-in LED and push-button latches included. Ships assembled.

van overhead cabinet with an enclosed microwave bay, Door Lifter (Flap Stay) door, round latch, and built-in LED lighting. Made to order.1. Title Primary (recommended): Vankea Lightweight Microwave Wall Cabinet – Left-Hand Sloped Overhead Campervan Storage Unit (Birch & Sage) Shorter e-commerce variant: Vankea Overhead Microwave Wall Cabinet – Left (Lightweight Campervan Storage, Birch/Sage) A note on the "L" and "R": in the ClickUp file "L" is the internal Left-hand build code, and there's a matching "R" version (EP-2028, WallCab R Above Kitchen). Since customers won't know your internal codes, I've translated "L" into "Left-Hand" in the customer-facing title so it reads naturally while still telling buyers which side the microwave bay sits on. SEO / Meta SEO title (≈60 char): Microwave Wall Cabinet for Campervans | Lightweight Overhead Unit Meta description (≈155 char): Lightweight birch-ply overhead wall cabinet with a built-in microwave bay and lift-up storage for any campervan or van conversion. Cabinet only. Fits any build. URL handle: microwave-wall-cabinet-left-campervan-overhead Meta keywords: campervan microwave cabinet, van overhead cabinet, wall cabinet with microwave slot, lightweight van storage, van conversion cabinet, RV wall cabinet, birch ply campervan furniture, overhead kitchen cabinet van, microwave housing cabinet, motorhome wall unit 2. Short Description (subtitle) A lightweight overhead wall cabinet with a dedicated built-in microwave bay on the left and a lift-up storage compartment alongside it — engineered for any campervan or van conversion. Cabinet only; microwave not included. 3. Material Used Verified from the ClickUp description and the BOM in the instruction PDF: Carcass: Ultra-lightweight plywood with a birch finish and a magnolia-tree core, or optional exclusive Paulownia (Polownia) plywood that cuts weight by up to 37% versus standard cabinetry. Door / painted faces: MDF used specifically for the shaker-style doors and faces, painted for a clean, premium cabinetry look. Finish colour: Dulux 10GY 71/180 – Pastel Sage (the sage-green body/top seen in the renders, paired with a natural birch-wood door front). Integrated lighting: Built-in LED strip (2.1 m). 4. What's Included Straight from the Bill of Materials (#12069 Build_2_Sp_170 Wall Cab-L): 1 × Assembled wall cabinet carcass (side left, side right, bottom, top strip + top panel, back panels, internal partition and right shelf) 1 × Microwave-bay door (fold-down flap style) 1 × Storage-compartment lift-up door 2 × Full-overlay hinge sets 1 × Door lifter / flap stay 1 × Push-button latch lock Fixing hardware: 19 × 3.5×30 screws, 8 × M6 screws, 8 × housing cams, 8 × M6 PVC inserts, 8 × wooden dowels 2.1 m × integrated LED strip Not included: microwave / appliance (the cabinet is designed to house a standard microwave — you supply your own). 5. Unique Selling Points (4) Purpose-built microwave bay – a dedicated, ventilated left-hand recess sized to house a standard campervan microwave, keeping your appliance secure and integrated rather than loose on a counter. Up to 37% lighter – built from ultra-lightweight birch ply with a magnolia core (or optional Paulownia), so you add kitchen function without eating into your van's payload. Smart lift-up storage + soft close – the adjoining compartment opens on a flap-stay door lifter with full-overlay hinges and a push-button latch, so it stays shut on the road and opens with one touch. Fits any van, ready to fit – supplied as a complete, pre-assembled unit with all mounting hardware and built-in LED lighting; the sloped overhead profile suits campervans of any size. 6. Long Description The Vankea Microwave Wall Cabinet (Left) brings proper kitchen function to your overhead space without the weight penalty of traditional cabinetry. Designed to mount above your van's kitchen run, it combines a dedicated built-in microwave bay on the left with a generous lift-up storage compartment beside it — giving you a home for your appliance plus everyday galley storage in one clean, integrated unit. It's built the Vankea way: an ultra-lightweight birch-ply carcass with a magnolia-tree core (or optional exclusive Paulownia plywood) that saves up to 37% in weight compared with standard builds, so you protect your payload while gaining storage. The shaker-style door faces are crafted from painted MDF and finished in Dulux Pastel Sage (10GY 71/180), paired with a warm natural-birch door front for a calm, premium look that works in any conversion. Everyday use is effortless. The storage door rises on a flap-stay door lifter with full-overlay soft-style hinges and clicks shut on a push-button latch lock that holds firm over rough roads. An integrated 2.1 m LED strip lights the space, and the cabinet arrives fully assembled with all mounting hardware included, ready to fix into your build. Because this is a versatile overhead unit rather than a van-specific part, it suits campervans of any size. Please note this listing is for the cabinet only — it is engineered to house a standard microwave, which is not included. 7. Technical Specification Table Specification Detail Product type Overhead wall cabinet with built-in microwave bay (Left-hand) Internal build code Sp_170 Lego_2 – WallCab L / EP-2027 (#12069) Overall dimensions (W × D × H) 1118 × 406.65 × 391.8 mm Overall dimensions (inches) 44.0″ × 16.0″ × 15.4″ Carcass material Lightweight birch-ply, magnolia-tree core (optional Paulownia ply) Door / face material Painted MDF, shaker style Finish colour Dulux 10GY 71/180 – Pastel Sage (body/top) + natural birch door front Weight saving Up to 37% lighter than standard cabinetry Configuration Left: microwave bay · Right: lift-up storage with internal shelf & partition Doors 1 × microwave-bay flap door, 1 × lift-up storage door Hinges 2 × full-overlay hinge sets Opening mechanism Flap-stay door lifter + push-button latch lock Lighting Integrated LED strip, 2.1 m Fixings included 19 × 3.5×30 screws, 8 × M6 screws, 8 × housing cams, 8 × M6 PVC inserts, 8 × wooden dowels Assembly Supplied pre-assembled with mounting hardware Compatibility Suitable for campervans / van conversions of any size Appliance Microwave not included — cabinet houses a standard microwave The side panels are angled/wedge-shaped, which is what gives the cabinet its sloped front profile (matches the renders). Worth mentioning in copy — I can add "sloped/angled front profile designed to follow the van's roofline."

White plywood kitchen cabinet with a fold-out bamboo counter and hidden toe-kick drawer.