Designed for the galley wall of a Ford Transit 148WB, this fully assembled 37.2-inch overhead cabinet turns unused wall space into organized storage. Two independent lift-up Shaker doors open to two compartments, each with upper and lower shelving, for dishes, pantry items, coffee supplies, and daily gear.The cabinet combines a 0.59-inch ultralight Paulownia plywood body with 0.69-inch MDF Shaker doors. A matching Stormy Sea finish gives your galley a coordinated look while the lightweight construction keeps unnecessary cabinet weight down.Push-button travel latches secure both doors, while flap-stay lifters support them when open. A flush-mounted 12V LED strip underneath provides task lighting across the galley counter.Concealed hardware and joinery keep exposed screws and visible fasteners out of sight. The cabinet arrives fully assembled and ready to mount, so installation focuses on positioning, structural mounting, and connecting the lighting.

Designed for the galley wall of your campervan, this cabinet gives everyday kitchen gear an organized home. Two compartments sit side by side, each with upper and lower shelving, so you can separate dishes, food, coffee gear, and daily items instead of stacking everything into one open space.The cabinet combines a 0.6-inch ultralight Paulownia plywood body in Pastel Sage with 0.6-inch natural bamboo doors. The lightweight body adds practical overhead storage, while the bamboo brings natural warmth to your van interior.Concealed joinery keeps exposed screws and visible fasteners out of sight for a clean finish on every side. Each full-height door has concealed stay hinges and its own black push-button travel latch for easy access and secure closure.The cabinet arrives fully assembled and ready to install. Position it, secure it to structural mounting points, and connect the pre-wired 12V LED strip underneath for task lighting across the galley below.

Designed for your Sprinter campervan, this kitchen brings storage and counter space together in one unit. The main cabinet and a second enclosed section sit side by side beneath a bamboo countertop, joined by a rear panel. A step-bridging base accommodates the floor transition; dry-fit it to your finished layout before mounting.A dedicated drawer keeps small items close at hand, while a three-level pull-out separates food, gear, and daily essentials. The second cabinet adds enclosed storage. Front and rear opening points let you access your gear from inside the van or through an open side door, depending on your layout.The bamboo countertop has a prepared opening for a 13-inch × 15-inch sink with an 8-inch bowl depth and a removable cover. Confirm exact sink and cutout compatibility before purchasing. A drop-down side table adds prep or dining space when extended. Sink and faucet are not included.A 0.59-inch plywood body in Pastel Sage pairs with 0.69-inch MDF fronts. Concealed joinery keeps exposed screws and visible fasteners out of sight. Flap hinges, full-overlay hinges, four push-button locks, and full-extension slides arrive installed in the fully assembled cabinet.

Designed for your campervan, this kitchen brings storage and counter space together in one compact footprint. A sink-side section with shelves and partitions organizes the core of your kitchen, while the fold-out bamboo counter adds work surface only when you need it, then folds flat to restore aisle clearance.Shaker-style drawers and door with black knobs keep everyday kitchen gear close at hand. A narrow side pull-out provides a separate place for taller items, and a hidden low compartment makes use of storage space near the base.The bamboo counter brings natural grain and warmth to the white cabinetry. A prepared sink opening lets you plan your plumbing and choose a compatible sink. The sink and faucet are not included.Built from 0.59-inch plywood, the cabinet has a white finish and concealed joinery for a clean exterior without exposed screws or visible fasteners. It arrives fully assembled and ready to mount, so installation focuses on positioning, checking clearances, and securing it to your van’s structure.

Designed for the galley wall of your campervan, this cabinet gives everyday kitchen gear an organized home. Two independent lift-up compartments sit side by side, each with upper and lower shelving, so you can separate dishes, food, coffee gear, and daily items.A Carbon Gray gel-stained wood body keeps the natural grain visible around the clean white front. The 0.59-inch lightweight plywood body adds practical storage without unnecessary cabinet weight.0.69-inch MDF Shaker doors bring a familiar cabinet style into your van. Supplied in white paint-ready primer, the fronts can be finished to match your interior. Concealed hardware and joinery keep exposed screws and visible fasteners out of sight.The cabinet arrives fully assembled and ready to install. Round push-button travel latches secure each door, flap-stay lifters support the doors while open, and an integrated 12V LED strip underneath brightens the galley.

This complete galley brings white Shaker-style cabinetry and a warm bamboo countertop into your Sprinter. The full set measures 75.3" W × 20.2" D × 37.8" H with the countertop and facade installed. A 0.59-inch Paulownia plywood body provides practical storage while keeping unnecessary cabinet weight down.Four coordinated sections form the run: a two-door base cabinet, single-door base cabinet, two-door sink base, and four-drawer storage cabinet. Together, five doors and four drawers give cookware, pantry supplies, and everyday utensils their own places.The 0.6-inch bamboo countertop runs the full length of the set and includes a prepared sink opening. Cabinetry is supplied white-primed and paint-ready, with MDF Shaker-style facades. Full-overlay, soft-close door hinges provide controlled closing, while round black push-button hardware completes the fronts.The set ships fully assembled and ready to mount, with cabinet hardware installed. Sink, faucet, cooktop, refrigerator and other appliances, plumbing, electrical and gas components, and van-mounting hardware are not included.

Family dinners in the campervan can feel like home, with a comfortable full-size sleeping platform ready when night falls. This integrated white dinette system combines three functions in one carefully planned footprint: daytime dining, a convertible bed, and organized underneath storage. Built from lightweight 0.59-inch Paulownia plywood, the two opposing benches measure approximately 58 inches wide by 17 inches high and extend to an overall length of about 69 inches when positioned in the van. The lightweight construction reduces weight by approximately 37% compared with standard builds without sacrificing practical strength or durability. Each bench features secure soft-close hinged-top panels with recessed brass finger pulls. Beneath the tops, fully ventilated compartments provide organized space for a compatible fresh-water tank, heating system, electrical equipment, tools, and travel gear. Multiple louvered cutouts and access points promote passive airflow, help reduce moisture buildup, and keep installed systems accessible for routine service. Two additional upper lids use heavy-duty butler-tray hinges. To convert the dinette for sleeping, remove the table, open the upper lids, and rest them securely on the integrated wooden support steps on the opposite bench. The panels bridge the aisle to create a unified, level surface for your cushions or suitably sized mattress. During the day, place your dinette table between the benches for a comfortable space to eat, work, or relax. At night, deploy the integrated panels and add your cushions or mattress to complete the sleeping setup. Premium details include a white primed finish, natural wood trim accents, soft-close hardware, heavy-duty butler-tray hinges, recessed brass pulls, integrated support steps, and louvered ventilation throughout. The complete bench system arrives fully assembled and ready to mount, requiring only positioning and secure attachment to your vehicle structure.

Designed for the living area of your Campervan, this cabinet gives a compact microwave a permanent place so you don't have to choose between appliance space and storage for everyday kitchen gear. The left section is sized for a compact 0.7 cu. ft. microwave, while the cabinet beside it gives you enclosed storage for dishes, food, coffee gear, or other everyday items. Inside the storage section, the inclusion of two shelf levels allows you to separate and organize your everyday items effectively, making better use of the cabinet height than a single large, open compartment. A gel-stained wood body keeps the natural grain visible, adding warmth and contrast around the clean white front. Above the microwave bay, integrated ventilation slots provide a direct airflow path for warm air to escape from the appliance area. The cabinet arrives fully assembled and ready to install, with a lightweight 0.59-inch plywood body, Shaker-style MDF front, concealed hardware, a push-knob travel latch button, flap-stay door support, and an integrated 12V LED strip underneath.