Kitchen 1 is Vankea's coordinated galley cabinet, built for the Transit 148 SM layout. The assembly connects a main cabinet section, a rear panel, a step-compensator base that bridges the Transit's floor step, and an extended countertop with a folding drop-down side table into one complete kitchen module — not separate cabinet listings. The main section includes a shelf, a lower drawer, and a tall pull-out storage frame, with a second section adding further enclosed storage. The countertop has a prepared sink opening and bamboo worktop surface over an MDF facade. Construction is 15mm plywood. The sink and faucet are not included — you can find these through Amazon or another retailer. The set ships fully assembled, ready to install. Dimensions Approx. 56.5"W x 19.4"D x 36.5"H What's Included Galley cabinet assembly with rear panel and step-compensator base Bamboo-topped countertop with drop-down folding side extension Lower drawer and tall pull-out storage frame Prepared sink cutout Cabinet assembly and motion hardware (hinges, slides, locks, brackets) Not Included Sink/basin, faucet, drain, water filter, pump, hoses, or plumbing fittings Cooktop, refrigerator, or other electrical appliances and wiring Countertop cover Van-mounting hardware These items are widely available through Amazon or another retailer. Compatibility Built specifically for the Transit 148 SM layout. Please confirm your van's model year, roof height, finished floor, and wall build-out before ordering — this is not a universal-fit kitchen for other Transit configurations or van platforms. Installation Dry-fit the full assembly, including the step-compensator base, before securing it. Confirm the sink cutout, side-table swing, drawer and pull-out travel, door clearance, and service penetrations. Mount to suitable vehicle structure using an installation method approved for your equipment.

This Sprinter 144 galley works from both sides — reach storage from the kitchen side or grab items from behind. A fold-out counter gives you more prep space when you need it, and a built-in step base is shaped to fit right over the Sprinter's floor step. Finished in Pastel Sage with a sink cutout ready to go. Specs Fits: Sprinter 144 Size: 44.5"W x 19.3"D x 36.5"H Finish: Pastel Sage Ships fully assembled, ready to install The sink and faucet are not included — you can find these through Amazon or another retailer.

The Justin kitchen is built as one compact galley for layouts that need food-prep space without a long cabinet run. Its fold-out work surface extends the counter only when needed, then closes flat against the cabinet to restore aisle clearance. The cabinet includes a sink-side section, internal shelves and partitions, drawers, a narrow side pull-out/service section, and a low hidden storage element near the base. Construction is 15mm plywood, finished in white. The sink and faucet are not included — you can find these through Amazon or another retailer. The set ships fully assembled, ready to install. Dimensions With facade and top: approx. 43.9"W x 18.9"D x 37.3"H Cabinet body only: approx. 43.9"W x 18.0"D x 36.5"H Package: approx. 46.1" x 39.4" x 7.1" What's Included Main galley cabinet with partitions, shelves, and drawer boxes Fold-out bamboo work surface with cabinet hardware Prepared sink-opening countertop Cabinet assembly hardware Compatibility Please confirm your van platform, model year, wheelbase, finished floor, wall contour, and aisle clearance before ordering — this is not a universal-fit kitchen. Installation Confirm the finished cabinet footprint fits your van, then test the fold-out surface, all drawers, and the narrow side access before mounting. Maintain clearance for plumbing, drainage, and ventilation. Secure to vehicle structure using an approved installation method.

The Jeff kitchen is a compact cabinet body that gains substantial working width from its extended countertop/table assembly. The cabinet includes a sink position, internal shelves, a lower drawer, a tall pull-out frame, and a dedicated drawer built for a cooktop. Construction is plywood, finished in white. The cooktop drawer is cabinet infrastructure — the cooking appliance itself is not included. The countertop includes a prepared sink opening; the sink and faucet are also not included — you can find these through Amazon or another retailer. The set ships fully assembled, ready to install. Dimensions With facade and extended top: approx. 54.6"W x 18.5"D x 37.1"H Cabinet body only: approx. 43.9"W x 17.1"D x 36.5"H Package: approx. 44.9" x 38.2" x 10.6" What's Included Cabinet body with internal shelves and partitions Lower drawer and tall pull-out storage Dedicated cooktop drawer assembly Main top, table, and extended countertop panel Facade and cabinet assembly hardware Assembly instructions Compatibility Please confirm your van platform, wheelbase, finished floor, wall contour, aisle width, and cooktop ventilation before ordering — this is not a universal-fit kitchen. Installation Dry-fit the finished cabinet footprint, then check the counter/table extension, cooktop drawer, tall pull-out, and all drawers at full travel. Confirm heat clearance and ventilation for your selected cooktop, plus plumbing and service access for the sink. Mount only to suitable vehicle structure.

Your entire Sprinter 170 kitchen in one coordinated run. Four sections — cooktop space, a tall pull-out, a sink station, and drawer storage — sit under one continuous bamboo countertop, with a drop-down table for extra prep or dining space. Finished in Pastel Sage for a clean, modern galley. Specs Fits: Sprinter 170 Finish: Pastel Sage with bamboo countertop Ships fully assembled, ready to install The cooktop, sink, and faucet are not included — you can find these through Amazon or another retailer.

The Martin kitchen is a full-length galley cabinet set designed around the Sprinter 170 project. A continuous countertop run sits above coordinated white shaker-style cabinetry, with multiple door cabinets, a center sink-base zone, and a drawer bank finished with round black push-button hardware. Cabinetry is supplied primed white and paint-ready. The countertop is a full-length wood/bamboo top with a prepared sink opening. The set ships fully assembled, ready to install. Dimensions With facade and countertop: approx. 75.3"W x 20.2"D x 37.8"H Cabinet bodies only: approx. 75.2"W x 19.3"D x 36.9"H Package: approx. 76.4" x 39.4" x 8.7" What's Included Coordinated galley cabinet set: door-storage, sink-base, and drawer-bank zones White shaker-style facade Full-length countertop with prepared sink opening Black cabinet hardware Assembly instructions Not Included Sink, faucet, drain, filter, pump, hoses, plumbing, cooktop, refrigerator, other appliances, electrical wiring, outlets, gas hardware, and van-mounting hardware are not included — all widely available through Amazon or another retailer. Compatibility Designed for the Sprinter 170 and 170 EXT layouts. Please confirm your van's model year, body configuration, finished floor, wall contour, and window position before ordering — this is not a universal-fit kitchen for other van platforms. Installation Dry-fit the full cabinet run and countertop before drilling. Check the sink opening, door and drawer travel, adjacent wall/window clearance, aisle width, and plumbing and ventilation routing. This is a wide assembly and requires at least two people for safe handling and accurate mounting.