01 / Microwave bay
Give your microwave its own space
A dedicated left-side bay frees up your counter. Confirm appliance fit, mounting, and ventilation clearances; microwave not included.
Product detailsSmart Space-Saving Cabinet, Built to Fit Your Campervan Perfectly
Designed for the Ford Transit 148WB galley wall, this fully assembled 37-inch cabinet combines a left-side microwave bay with right-side storage. An open upper cubby keeps everyday items accessible while parked, and an enclosed lower compartment sits behind a lift-up door.
A 0.59-inch lightweight plywood body pairs with a 0.69-inch MDF Shaker-style door, both finished in Stormy Sea. Concealed joinery keeps exposed screws and visible fasteners out of sight for a clean exterior.
A round push-button travel latch secures the storage door. The concealed full-overlay hinge and flap-stay lifter support it when open, while a pre-wired 12V LED strip underneath lights the counter or living area below.
The center partition separates the microwave bay from the storage section. The microwave is not included. Confirm the appliance dimensions, usable bay opening, mounting method, and ventilation requirements before ordering.
The cabinet arrives fully assembled and ready to mount. Position it, secure it to structural mounting points, connect the lighting, and install your microwave according to its manufacturer’s instructions.
Main features
Designed around your day.
Thoughtful details, already built in.
02 / Everyday storage
Open above. Tucked away below.
An open upper cubby keeps essentials within reach while parked. The enclosed lower compartment gives other gear its own home.
03 / Easy access
Lift, reach, and close
A flap-stay lifter supports the Shaker-style door when open. The round push-button travel latch secures it when closed.
04 / Integrated lighting
A brighter galley, built in
The pre-wired, full-width 12V LED strip lights the space below. The cabinet arrives fully assembled and ready to mount.
ConstructionMaterials
- ✓Cabinet body: 0.59" lightweight plywood
- ✓Body finish: Stormy Sea
- ✓Door: 0.69" MDF Shaker-style, Stormy Sea
- ✓Hardware: concealed full-overlay hinge, flap-stay lifter, and push-button travel latch
- ✓Lighting: pre-wired, full-width 12V LED strip underneath
Stormy Sea. Classic Shaker detail.
A 0.59-inch lightweight plywood body pairs with a 0.69-inch MDF Shaker-style door, both finished in Stormy Sea.
A clean, considered finish
Concealed joinery keeps exposed screws and visible fasteners out of sight. A center partition separates the appliance bay from the storage compartment.
Hardware already in place
The concealed full-overlay hinge, flap-stay lifter, and push-button travel latch arrive installed. The cabinet is fully assembled, with its 12V lighting pre-wired.
Dimensions
Product dimensions
In the boxWhat's included
- ✓Fully assembled cabinet with left-side microwave bay
- ✓Right-side open upper cubby and enclosed lower compartment
- ✓Shaker-style lift-up door with concealed hinge, flap-stay lifter, and push-button latch
- ✓One pre-wired, full-width 12V LED strip
- ✓Microwave not included
SpecificationsBuilt to these numbers
VehicleFord Transit 148WB camper conversion
Dimensions37" W × 15.5" H × 13.5" D
Product weightApproximately 40.0 lbs
PlacementLeft-side upper wall above galley or living area
Cabinet body0.59" lightweight plywood
Body finishStormy Sea
Door0.69" MDF Shaker-style, Stormy Sea
LayoutLeft microwave bay; right open upper cubby and enclosed lower compartment
HardwarePush-button travel latch, concealed full-overlay hinge, flap-stay lifter
LightingOne pre-wired, full-width 12V LED strip underneath
AssemblyFully assembled, ready to mount
MicrowaveNot included; confirm appliance fit and clearances
FitmentCompatibility
Ford Transit 148WB37" wideLeft-side upper wall
Designed for the galley wall, swivel-seat area, or living-space wall, depending on your layout.
Footprint: 37" W × 15.5" H × 13.5" D. Confirm structural mounting points, usable microwave opening, and appliance ventilation clearances before ordering.
InstallationBefore you install
Medium difficulty2 peopleAbout 1 hour
Fully assembled. Ready to mount.
Position the cabinet, secure it to structural mounting points, connect the 12V lighting, and install your microwave according to its mounting and ventilation requirements.
Tools to have ready
- Power drill & drill bits
- Rivet nut tool
- Screwdriver
- Measuring tape & level