Dinette Bed
Dinette Bed
Fold-out prep table, integrated pull-out step, and a unique facade design.
Dinette Bench (Left & Right Set)
Transform your van's rear into a full-width dinette by day and a complete sleeping platform by night with this left-and-right bench pair. Designed as mirrored partners, the two units join seamlessly to create one continuous seat and bed surface, giving you flexible living space without compromising on either function.
How It Works
By day, each bench's top panel sits flat and closed, forming a clean, flush bench seat for dinette-style seating. To convert to bed mode, the hinged panel flips up and rests on top of an integrated bamboo rail running along the front edge — a built-in support ledge that holds the raised panel securely in place. With both panels on the left and right units flipped up and supported this way, they join together to form one full-width sleeping platform, spanning the entire rear of your van.
Why builders choose this item
Four things worth knowing
Flip-Up Panel with Bamboo Support Rail
The top panel lifts and rests on an integrated bamboo rail along the front edge, which acts as a ledge holding it securely in the raised position.
Fold Down to Form a Full-Width Bed
At night, both panels fold flat and join together across the left and right units to create one continuous, full-width sleeping platform.
Purpose-Built for Utility Storage
The left bench is sized to house a 30-gallon fresh water tank, outside shower plumbing, and a glycol heater/evaporator, while the right bench's dual independent top panels (4 hinges total) allow targeted access to separate storage sections without disturbing the whole seat/bed surface.
Component-Ready, Reinforced Construction
Shipped as empty enclosures so builders can fit their own tank, shower, and heater components; the right bench steps up to reinforced 19mm MDF (vs. 17mm on the left) to support heavier installed equipment.
Materials
- MDF construction — 17mm (left) / 19mm (right), grooved interior panels
- Bamboo support rail along the front edge
- Standard hinges on top panel(s), plus full-overlay hinge set on the front door
- Round lock latch,
- Louvered ventilation — single panel (left) / dual panels, side + rear (right)
What's Included (Left & Right Set)
- 2x Bench cabinet bodies (empty enclosures) — 1 left, 1 right
- 2x Full-overlay front access doors with round lock — 1 per unit
- Hinged top panel(s) with bamboo support rail — 1 panel (8 hinges) on the left, 2 panels (4 hinges total) on the right
- Mounting hardware for both units
Specifications
Built to these numbers
Built to House Your Systems
Sold as empty enclosures, both benches are engineered to give builders full flexibility in fitting their own components:
- Left bench is built from grooved 17mm MDF for rigidity suited to a water tank's weight and moisture exposure. It is sized to house a 30-gallon fresh water tank, outside shower plumbing, and a glycol heater & evaporator — with a louvered vent panel for airflow around heat-generating equipment and a secure round lock on the front storage door for stability while driving.
- Right bench steps up to reinforced 19mm MDF, built to carry heavier equipment loads. It offers two independent top panels (4 hinges total), allowing separate access to different storage sections without disturbing the full seat/bed surface, plus a full-overlay front door for quicker everyday access. Dual-direction louvered ventilation (side and rear panels) supports components that need airflow from multiple sides.
Together, they're engineered as a matched set — structurally tuned to what each side is expected to hold
Featured collection
-
Vankea Dinette Bed System 54"
Regular price $5,690.00 USDRegular priceUnit price per -
Vankea Kitchen Base Cabinets 144
Regular price From $4,500.00 USDRegular priceUnit price per -
Vankea Over-Cab Storage
Regular price $2,200.00 USDRegular priceUnit price per
