A 2-piece CNC-cut partition wall kit for the Vankea Sprinter 170" WB van conversion, separating the cab from the living area and shower zone. Crafted from durable 15-ply plywood with a clean white stain finish, including a decorative leaf-pattern divider panel.   Title:Vankea Sprinter 170" Partition Wall Kit – Shower Wall & Leaf-Design Divider Panel (15-Ply Plywood, White Stain) Short Description:A 2-piece CNC-cut partition wall kit for the Vankea Sprinter 170" WB (Sp_170 Lego_2) van conversion, separating the cab from the living area and shower zone. Crafted from durable 15-ply plywood with a clean white stain finish, including a decorative leaf-pattern divider panel. Long Description:This partition wall kit is purpose-built for the Vankea Sprinter 170" wheelbase modular conversion system (Sp_170 Lego_2). It creates a clean structural and visual division between the cab and the rear living/shower area of your van build. The kit includes a dedicated Shower Wall panel that forms part of the wet-bath enclosure, and a Partition Wall panel featuring a distinctive laser-cut "Leaf Design" — an organic, lattice-style cutout that adds a decorative touch while allowing airflow and visual openness between zones. Every panel is precision CNC-cut from 15-ply plywood for consistent, accurate fitment against your van's factory contours, then finished with a white stain for a bright, cohesive interior look that pairs well with most Vankea cabinetry and wall finishes. This part is also engineered as part of a modular assembly system, with a matching variant available for Ford Transit 148" WB conversions. Material Used:15-ply plywood (CNC-cut), finished with white stain paint What's Included: 1x Shower Wall panel (CNC-cut, 15-ply plywood) 1x Partition Wall panel with "Leaf Design" decorative cutout (CNC-cut, 15-ply plywood) White stain finish applied to both panels prior to shipping Technical Spec Table: Spec Detail Material 15-ply plywood Finish/Color White Stain Number of panels 2 (Shower Wall, Partition Wall – Leaf Design) Cutting method CNC-machined Reference sheet size 1220mm x 501.8mm (nesting layout) Compatible platform Sprinter 170" WB (Sp_170 Lego_2 module) Related variant Ford Transit 148" WB SM partition wall (sold separately) Production process CNC cut → paint → pack Suggested Meta Title:Vankea Sprinter 170" Partition Wall Kit | 15-Ply Shower & Leaf-Design Divider Panel Suggested Meta Description:Shop the Vankea Sprinter 170" partition wall kit — CNC-cut 15-ply plywood shower wall & decorative leaf-design divider panel, white stain finish. Built for DIY van conversions.

A complete, pre-cut interior wall and ceiling shell for 144" wheelbase van conversions. The kit forms both side walls, the front and rear ceiling sections, and the side-door wall panels in one matched set, finished in a clean white stain shiplap plank style with window and roof vent openings pre-cut at the factory. Ships as a ready-to-assemble panel kit.     Vankea Complete Wall & Ceiling Liner Kit — Camper Van Interior Shell A complete, pre-cut interior wall and ceiling shell for 144" wheelbase van conversions. The kit forms both side walls, the front and rear ceiling sections, and the side-door wall panels in one matched set, finished in a clean white stain shiplap plank style with window and roof vent openings pre-cut at the factory. Ships as a ready-to-assemble panel kit. Request a Build Quote 🚚 Fast Shipping · 🛠️ Made to Order · ↩️ [Returns policy] WHY BUILDERS CHOOSE THIS ITEM Four things worth knowing 01 — Precision-matched panel systemEvery wall, ceiling, and trim panel is factory-cut to exact tolerances so the pieces key into one another on installation — no on-site trimming, shimming, or guesswork needed to get a tight, square fit. 02 — Finished white stain shiplap lookPanels arrive pre-finished in a bright, clean shiplap-style white stain on both the walls and ceiling, giving the cabin a warm, cabin-like look straight out of the box with no additional painting or staining required. 03 — Pre-cut windows and roof ventsSide window openings, the rear door window opening, and three roof vent/skylight cutouts are machined in at the factory, so builders don't have to measure, mark, or cut openings on site. 04 — Full shell coverage in one kitBoth side walls, front and rear ceiling, side-door wall panels, window trim, and structural corner sockets ship together as one complete, matched set instead of separate piecemeal parts. THE DETAILS Turn a bare cargo van shell into a finished cabin with the Vankea Complete Wall & Ceiling Liner Kit — a full interior paneling system designed specifically for 144" wheelbase van conversions. Rather than sourcing and cutting raw sheet stock panel by panel, this kit ships as a matched, factory-cut set that covers the entire upper interior: both side walls, the front and rear ceiling sections, and the side-door wall panels, all engineered to key together for a fast, accurate build. Every panel is pre-finished in a white stain shiplap plank style, so the cabin gets a warm, finished look the moment the shell goes in — no on-site painting or staining needed. Window openings for the side windows and rear door, along with three roof vent and skylight cutouts, are pre-cut at the factory to exact placement, saving significant time over marking and cutting openings by hand. Matching window frame trim, corner support sockets, and dedicated ceiling framing (including a reinforced position for a roof-mounted A/C unit) are included so the shell is structurally ready for hardware installation. Built from 15-ply plywood for a rigid, road-ready structure, the kit is sized to fit a 144" wheelbase van interior and arrives as a ready-to-assemble panel set with a full instruction guide, making it a strong starting point for a professional-grade conversion build. Materials Panel core: 15-ply plywood Finish: White stain, shiplap plank styling (walls and ceiling) Trim: Matching window frame and corner socket trim pieces What's Included Left-side wall panel set (9 panels) Right-side wall panel set (4 panels) Front and rear ceiling panels, with pre-cut vent/skylight openings 2 side-door wall panels 1 mirrored wall panel Window frame trim assembly (4-piece) Left and right window insert assemblies Wall corner support socket assembly (cover, left, right, and top pieces) Ceiling framing pieces, including a reinforced A/C ceiling frame Printed assembly instruction guide SPECIFICATIONS Built to these numbers SPEC Detail CONFIGURATION Full wall + ceiling shell: 2 side walls, front/rear ceiling, 2 side-door wall panels OVERALL DIMENSIONS (W × L × H) 79.53" × 126.50" × 80.31" (2020 × 3213 × 2040 mm) PANEL MATERIAL 15-ply plywood FINISH / COLOR White stain, shiplap plank style VENT/SKYLIGHT OPENINGS 3 pre-cut roof openings WINDOW OPENINGS Pre-cut side window and rear door window openings TRIM Window frame trim, wall corner support sockets CEILING FRAMING Includes reinforced A/C mounting frame COMPATIBLE PLATFORM 144" wheelbase van conversions ASSEMBLY Ships as a pre-cut, ready-to-assemble panel kit with instructions INCLUDED HARDWARE None — panel shell only Title: Vankea Sp_144 Lego_1 Interior Wall & Ceiling Panel Kit (26-Piece Set, EP‑1367) Short Description: A complete, CNC-cut interior wall and ceiling paneling system for the Vankea Sp_144 Lego_1 van conversion module. This 26-piece kit includes precision-cut wall panels, ceiling panels, and window frame components made from 15-ply plywood, giving builders a full structural interior shell ready for finishing. Long Description: This Wall & Ceiling Panel Kit is the core structural interior lining for the Vankea Sp_144 Lego_1 conversion system, designed for Sprinter‑style 144" wheelbase vans. The kit includes a complete set of CNC-cut 15-ply plywood panels covering both side walls (left panels L1–L9, right panels R5–R8), front and rear ceiling sections, side door wall panels, and mirrored wall panels for symmetrical builds. It also includes dedicated window frame assemblies (multi-piece frame kits for cut-out windows) and wall frame socket components used for mounting hardware or fixtures into the wall structure. Every panel is cut from digital templates for consistent, repeatable fit, using a nested cutting layout that efficiently uses full sheets of plywood. As part of the broader Sp_144 Lego_1 module, this wall and ceiling kit is designed to integrate with other Vankea components — including the sliding door panels, partition walls, and rear pillar arches — giving builders a coordinated, professional-grade shell to build their camper interior around. Material Used: 15-ply plywood (multi-ply plywood construction), CNC-cut. Approximately 7 full sheets of material used per kit. What's Included (26 primary components): Sp_144 Wall L1–L9 (9 pieces, left-side wall panels) Sp_144 Wall R5–R8 (4 pieces, right-side wall panels) Sp_144 Ceiling_Rear and Ceiling_Front panels Mirror Wall L1–L4 (4 mirrored wall panels for symmetry) Sp_144 Wall Side_Door_1 and Side_Door_2 Window Frame_Wall_7 (4-piece window frame subassembly) Ceiling Frame (x2) and Ceiling Frame_AC Wall_Windows_Right and Wall_Windows_Left assemblies (multi-piece frame sets) Wall Frame Socket assembly (cover, left, right, and top pieces) Technical Spec Table: Spec Detail Part Number EP‑1367 (Sp_144 Lego_1 Wall, ref #10300) Material 15-ply plywood Cutting method CNC-cut (digital nested layout) Sheets used per kit 7 sheets (per production record) Total primary components 26 (plus multiple sub-parts for window frames and sockets) Compatible system Vankea Sp_144 Lego_1 van conversion module Panel types included Side walls, ceiling panels, side-door wall panels, window frames, mirrored wall panels, frame sockets Finish Not documented in source files Panel dimensions/weight Not documented in source files Suggested Meta Title: Vankea Sp_144 Lego_1 Wall & Ceiling Panel Kit – 15-Ply Plywood Van Interior | EP‑1367 Suggested Meta Description: Shop Vankea's complete 26-piece interior wall and ceiling panel kit — CNC-cut from 15-ply plywood for Sprinter 144" van conversions. Part of the Sp_144 Lego_1 modular system.

Transform your camper van with the Vankea Sprinter 144 Ceiling Panel, a precision CNC-cut ceiling solution engineered specifically for Mercedes-Benz Sprinter 144 High Roof vans. Designed for a clean factory-inspired finish, this premium ceiling panel provides pre-cut openings for your roof fan, skylight, and electrical components while maintaining a seamless wood appearance throughout your build. Crafted from high-quality furniture-grade plywood, the panel combines durability with modern aesthetics, creating a warm interior that complements any camper conversion. Every opening is precisely positioned to simplify installation and eliminate the need for extensive measuring or cutting, allowing you to spend less time building and more time exploring. Whether you're completing a full conversion or upgrading an existing interior, the Vankea Sprinter 144 Ceiling Panel delivers the perfect balance of precision, functionality, and style. Four things worth knowing 01 Precision CNC-Cut Design Each ceiling panel is CNC-machined for an accurate fit on Mercedes-Benz Sprinter 144 High Roof vans, reducing installation time while ensuring a professional finish. 02 Roof Component Ready Pre-cut openings accommodate common roof accessories including a 14" × 14" roof fan, skylight, lighting, and electrical components for a clean installation. 03 Premium Furniture-Grade Finish Manufactured from durable plywood with a refined wood grain surface that brings warmth and a premium appearance to any camper van interior. 04 Lightweight & Strong Engineered for strength without unnecessary weight, providing reliable support while preserving valuable payload capacity. The Details The Vankea Sprinter 144 Ceiling Panel is designed to provide a clean, finished ceiling that looks professionally installed. Its precision-cut profile follows the contours of the Sprinter roof while integrating openings for roof-mounted accessories, lighting, and wiring. Compatible with most standard 14" × 14" roof fans and roof vents, the panel eliminates much of the measuring and trimming required during a typical van conversion. With a furniture-quality finish and carefully rounded edges, the ceiling creates a warm, modern atmosphere that pairs perfectly with Vankea cabinetry and interior components. Ideal for DIY builders and professional installers alike, this ceiling panel offers an efficient solution for achieving a factory-quality camper van interior. Materials ✓ Furniture-grade plywood construction ✓ Precision CNC-machined profile ✓ Smooth sanded wood surface ✓ Rounded finished edges ✓ Ready for staining, clear coating, or custom finishing What's Included ✓ Sprinter 144 ceiling panel ✓ Pre-cut roof fan opening ✓ Pre-cut skylight opening ✓ Electrical accessory cutouts ✓ Pre-drilled mounting locations ✓ Installation-ready panel Specifications Spec Detail Compatibility Mercedes-Benz Sprinter 144 High Roof Overall Length 126 in Overall Width 41 in Thickness 0.6 in Material Furniture-grade plywood Finish Natural wood Roof Fan Opening Fits standard 14" × 14" roof fans Installation Interior ceiling Mounting Pre-drilled mounting holes

Matched left & right rear door frame assembly for camper van conversions. CNC-cut from 15mm plywood for a precise, repeatable fit — ready to install into your buildTitleVankea Rear Door Frame Assembly — Camper Van Conversion Component Short DescriptionA modular rear door frame assembly for camper van conversions, supplied as a matched set of frame and trim pieces engineered to fit together into a finished rear door structure. Long DescriptionThe Vankea Rear Door Frame Assembly is a modular rear door component designed for camper van conversion builds. Rather than a single molded piece, it's built from multiple coordinated frame and trim components that assemble into a finished rear door structure, giving builders a consistent, repeatable fit across compatible van layouts. Each piece in the set is manufactured to match its counterpart frame panel exactly, so the assembly goes together the same way every time. This part is supplied as a build-ready component for installation into a larger van conversion project rather than as a standalone finished product. 4 Unique Points 01 — Modular, matched-fit designEngineered as a coordinated set of parts that mate precisely with one another, removing the need for custom fitting during installation. 02 — Multi-part frame assemblyShips as a set of matched frame and trim pieces rather than one solid piece, keeping the structure lighter while maintaining consistent alignment. 03 — Purpose-built for van conversionsDesigned specifically for integration into camper van rear door builds, making it a direct fit for compatible conversion layouts. 04 — Consistent, repeatable manufacturingProduced to a fixed part specification, so each unit matches the last — useful for builders producing multiple vans to the same layout. Spec / Technical Table Spec Detail Component type Rear door frame assembly Configuration Multi-part frame set (2 frame panels + trim/support pieces) Included pieces 5 pieces total (see "What's Included") Dimensions To be confirmed Weight To be confirmed Price To be confirmed Material UsedTo be confirmed — no material spec currently available. What's Included 2 × door frame panels 1 × trim/support piece (small) 2 × trim/support piece (small, matching pair)

sp144leafpartitionwall